Tailings & Process Water Packages.
Electrical, instrumentation and control hardware documentation for defined subcontract packages in Uzbekistan.
Recognise the equipment.
Define the output.
process water pumps · reclaim water · sump level · telemetry · filtration
Possible remote documentation support for Mineral processing OEM / approved EPCM / water skid contractor. Final code basis, scope and deliverable register are agreed with the client.
A defined package.
Not a whole EPC contract.
These deliverables can be selected individually. Scope can be limited to drafting or document review under the client's engineering leadership.
Each selected deliverable is entered in an agreed document register with revision, review stage and file format. Native EPLAN/DWG files, PDFs and XLSX/CSV registers are provided only when included in the RFQ. Optional items shown above are not included automatically.
See typical issued documents & formats ↗Related document example (in preparation): Flotation Reagent Dosing Package ↗
From project inputs
to review-ready files.
Client provides
- Approved P&IDs, equipment list and functional/design boundaries
- Current vendor package drawings, tags and instrument datasheets
- Instrument/motor quantities and required file formats (EPLAN, PDF, XLSX as agreed)
- Owner's standards register and controlled document numbering templates
Typical review activities
- Identify unresolved P&ID, tag and interface discrepancies
- Map device signals, terminal/wire IDs and instrument references
- Check BOM, I/O, loop and cable schedule consistency
- Issue comment register and agreed revision for client approval
Acceptance conditions
- Named engineering reviewer on customer's side
- Defined technical assumptions and change-control route
- Mutually approved deliverables, format and number of revisions
- Any site sign-off and regulated acceptance outside remote package
Equipment requirements.
Then local rules.
Listed standards are potential design references, not universal compliance claims. The responsible engineer confirms application, edition, contractual adoption and local rules.
Relevant technical codes
IEC 61439 if LV assembly; country site electrical rules; owner environmental specifications; IEC 61082 / IEC 81346 for drawing structure and equipment identification where adopted.
Requirements vary by equipment construction and process classification.Uzbekistan context
Client-adopted IEC and national O‘z DSt/related standards; no automatic assumption that Russian or Kazakh PUE applies.
Applicable Uzbekistan PUE, O‘z DSt / national technical regulations, local energy/industrial requirements and approval route.
Fixed site installation and product documentation are separate work scopes.Excluded from this package
Tailings dam safety, flood/environmental controls and regulated site approvals excluded; only noncritical auxiliary documentation.
Safety of machinery, local mining permits and critical protective functions are retained by the appointed owner / OEM design authority.IEC 61439 and cabinet design
For in-scope low-voltage switchgear/controlgear assemblies, apply IEC 61439-1 together with the relevant product part (typically IEC 61439-2), subject to national adoption and the project specification. IEC 60204-1 may also apply to machine electrical equipment.
Engineering drawings are not evidence of assembly conformity. The responsible manufacturer retains design verification, routine verification, product conformity and approval duties unless separately assigned to a qualified party.Have a defined E&I
work package?
Share equipment type, project country, document register, available data and requested deliverables. No confidential drawings in the public form.
Discuss this engineering scope ↗The client retains process design authority, site engineering, statutory approvals and safety-function validation. Documentation outputs and review procedures are agreed before start.
← Back to equipment